The model 1310 Combination Rate of Flow Control & pressure reducing Valve is a hydraulically operated, diaphragm actuated, control valve that prevents excessive flow by limiting flow to a preselected maximum rate, and reduces a fluctuating higher upstream pressure to lower constant downstream pressure.The flow limiting and pressure reducing valve prevents excessive flow by sensing the pressure differential across the specially sized orifice plate. The pressure reducing throttling action is controlled by a pressure reducing control pilot, which reduces a higher inlet pressure to a lower constant downstream pressure regardless of changing flow rate, as long as the flow rate is below a preset maximum. The orifice plate is factory calibrated based upon minimum and maximum flow rate requirements.

Features

• The primary benefit of using a hydraulically actuated valve is the use of line pressure as motive power to operate. Whether used to control pressure, flow or level, these valves operate without the need for external pressures and/or electricity.
• The hydraulically operated, diaphragm actuated, globe valves consist of three major components: body with SS316 seat, special reinforced diaphragm assembly, and cover with bearing installed. The only moving part is the diaphragm assembly guided top and bottom by a precision machined stem. The nylon fabric reinforced synthetic rubber diaphragm provides superior sensitivity and control for all applications.
• The hydraulically operated, diaphragm actuated control valves are closed-loop systems. The main valve is controlled by a pilot that compares its spring setting (set-point) to the process variable (ie. pressure, flow, and/or level). As the process variable changes, the pilot senses the change and compensates to keep the process variable as close to the desired set-point as possible. As such, these valves are single set-point control valves, and a set-point change will require operators to change the spring setting of the pilot.
• The valve body is made of ductile iron, withstanding both high hydraulic and mechanical stress.
• The valve is equipped with 316 stainless steel seat, it maintains excellent durability against erosion and ensuring a drop-tight sealing.

Series 1310 Pressure Reducing FLow limiting Valves

Automatic Control Valves material of construction
ACV material of construction

Flow Limiting Valves Model 1310
ACV PN10
ACV PN16

Operation and Maintenance Manual 

General Catalogue